Device Off Mode; Winter-Heating/Summer-Air Conditioning Modes - Vemer Crono.X User Manual

When in this status the programmable thermostat is completely disabled or else it
keeps the antifreeze temperature (which can be altered by the user).
The antifreeze temperature is determined by the parameter "OFF" in
Advanced Programming (cfr. pages 56 and 58).
The Antifreeze default temperature is 6°C but can be set from 1°C to 10°C.
To shut down the system set "---"
When in OFF status, the time, day of the week and the temperature will still be read.
To select the off operation status
Press : only the time, day and temperature will be displayed.
To exit the off operation status
Press : the device will resume the previous operation mode (Manual or
Automatic).
WINTER-HEATING /SUMMER-AIR CONDITIONING
CRONO.X controls both Heating and Air-conditioning systems.
Depending on the selection, the device's control mode is indicated by the fl ame icon
for WINTER – HEATING or by the snowfl ake icon
CONDITIONING.
The factory setting is WINTER-HEATING.
To select winter-heating or summer-air conditioning:
1) Press using a sharp tool, the display will read
(WINTER-HEATING operation)
DEVICE OFF
OPERATION MODES
- 48 -
User Manual - CRONO.X programmable thermostat
for SUMMER – AIR-