Table of Contents
Advertisement
Testing the complete configuration
Testing port network equipment
These tests verify that the time division multiplexing (TDM) cables and terminators work. If a
FAIL Result code is seen, check these cables. If problems persist, see the maintenance book
for your configuration.
Checking port network status for each media gateway
The port network status may suggest problem areas. Tests described later provide more
specific diagnostic information.
To check the port network status for each media gateway:
1. Type status port-network number <1-64> and press Enter.
2. Verify the screen displays a Port Network Status screen similar to
network status screen for Cabinet 1—Avaya S8500
Verify these service states:
136 Installing and Connecting the MDF and Telephones
Field
Service State
TDM Bus A
in
TDM Bus B
in
Tone/Clock
in
PKT
in
Figure 60: Sample port
on page 137.
Advertisement
Table of Contents
