Table of Contents
Advertisement
Installing the main distribution frame
Cable clamps are required in installations with cable slack managers. At the rear of the media
gateways, install two cable clamps using the screws provided. These clamps hold the 25-pair
input/output or MDF cables in place.
Manager—example for MCC1 Media Gateway
Cable Slack Manager—example for SCC1 Media Gateway
placement and cable routing.
Figure 8: Cable routing through Cable Slack Manager—example for MCC1 Media Gateway
Figure notes:
1. Top of Media Gateway
2. Cable Slack Manager
3. Cable Clamp
26 Installing and Connecting the MDF and Telephones
Figure 8: Cable routing through Cable Slack
on page 26 and
4. Spare Center Troughs
5. Media Gateway Trough for
Port Cables
Figure 9: Cable routing through
on page 27 show cable clamp
cbdfflr CJL 102396
Advertisement
Table of Contents
