Yamaha Genos Reference Manual page 78

Recording Melodies via Step Recording
The explanations here apply when one of "Ch1"–"Ch16" is selected in step 4 on
the bottom left of the display, you can input the notes one by one, using the controls below.
Control Names and Functions
q
Event List
w
Song Position
(Measure: Beat:
Clock)
e
>/o (Play/Pause)
r  (Stop)
t
Cursor
y
Step Rec
u
Velocity
i
Length
o
Note Type, Note
Indication
!0
Delete
78
Genos Reference Manual
q
y u i
Indicates events such as note and Voice selection which have been input. For details, refer to
page 83.
Indicates the current Song position. Events such as note and Voice selection you have input are
recorded at the position indicated here. You can change the current position (Measure: Beat:
Clock*) by using the Data dial.
* Clock: Smallest unit for the Song position and note length. A quarter note consists of 1920 clocks.
Plays back or pauses the current Song.
Stops the current Song to return to the top of the Song.
Lets you move the cursor position.
Turning this on shows the Step Recording display, and turning it off shows the Step Edit display.
Determines the velocity (loudness) of the note to be entered. The velocity value can be specified
within a range from 1 to 127. The higher the velocity value, the louder the sound becomes.
• Kbd.Vel: Actual resulting velocity
• : 127
• : 111
• : 95
• : 79
• : 63
• : 47
• : 31
• : 15
Determines the gate time (note length) of the note to be entered.
Tenuto :
Normal :
Staccato :
Staccatissimo :
Manual: For freely setting the gate time. Touch "Manual" and close the pop-up window by touch-
ing "OK," then set the gate time to any desired percentage by using the Data dial.
Touching [Note Type] repeatedly will alternate the type of the note indications at right in order: nor-
mal, dotted, and triplet. Select one of three types, then select (turn on) one of the note indications
with which the next note is input. If you touch the selected note indication (which is turned on)
again, a rest will be input with the corresponding length.
Deletes the selected data.
page 77. With [Step Rec] turned on at
w
e
r
t
o !0
99%
80%
40%
20%