Yamaha Genos Reference Manual page 89

Undo/Redo
If you've made a mistake or you're not completely satisfied with your performance, you can use the Undo
function to erase the take and try again.
1
Touch [Undo] on the display.
The latest recording that you made is cancelled. If you want to restore the operation, touch [Redo] before
going to Step 2.
2
Start again with Step 4 in "Basic Procedure of Audio Multi Recording."
Next, let's record your singing to the Sub track. You can record your vocals while listening to playback of the Main track.
5
Practice the part (sing into the microphone) to check the level
and adjust the recording volume on the "Monitor" meter and
the corresponding slider on the display.
Adjust so that the volume doesn't constantly go into the "red" and light up the
indicator. If it does, you may have to turn the microphone input level down a little.
6
Record to the Sub track.
6-1
Touch [Rec] corresponding to the slider of "Sub" to turn it on.
The Sub track is selected as destination.
6-2
[] (Rec) to enable recording.
6-3
Touch [>/o] (Play/Pause) to start recording.
Immediately after this operation, start singing along with the Main track playback.
6-4
When your performance is finished, touch [] (Stop) to stop recording.
6-5
To hear your new recording, touch [>/o] (Play/Pause).
Adjusting the Volume Balance between the Main and Sub tracks
On the meters and sliders corresponding "Main" and "Sub" on the display, you can adjust the playback volume of Main
and Sub tracks separately. By touching [Main]/[Sub] to turn it off, you can also mute the Main/Sub tracks.
7
Press the [EXIT] button to exit from the Audio Multi Recording
display.
At this point, the recorded data have not been processed with the Export operation
(converting a Multi Track Audio file to a WAV file). If Export is necessary, refer to
the "Export—Converting a Multi Track Audio File (.aud) to a WAV File" on
page 90.
NOTE
• Press the [DEC] and [INC] buttons
simultaneously to instantly reset the
recording volume to 90.
• If you call up a different display, press
the [RECORDING] button to return to
the Multi Track Recorder display.
NOTE
Make sure that the "Rec Mode" on the
display is set to "Normal" here.
NOTE
The Multi Track Audio file (.aud) can be
played back only on the Genos. It can be
converted to WAV file format by using
the Export function.
Genos Reference Manual
6
89