Track - Yamaha Genos Reference Manual

Bounce Recording—Merge Main and Sub Tracks to the Main Track
You can mix all data from the Main and Sub tracks to one track (Main track) by Bounce recording. This method
allows you to empty the Sub track, making it available for recording of another part to the Sub track by Normal
recording.
1
To select the desired file, execute Steps 1–3 in "Selecting a Multi Track Audio File (.aud)"
on page 91.
2
Set the parameter "Rec Mode" to "Bounce."
3
Playback the audio while checking and adjusting the volume settings for recording.
Playback the recorded tracks, and adjust the Main and Sub track playback volumes
recording volume using the "Monitor" meter/slider. The volume balance set here affects when recording.
4
Touch [] (Rec) then touch [Yes] to proceed.
If you do not want to delete the recorded data of the Sub track, touch [No] instead of [Yes] above.
5
Touch [>/o] (Play/Pause) to start Bounce recording.
All data in the Main and Sub tracks are mixed and recorded to the Main track.
When playback of the Main and Sub tracks is finished, Bounce recording automat-
ically stops.
6
To hear your new recording, touch [>/o] (Play/Pause).
The Sub track is now empty, allowing you to record another part to the Sub track by the Normal recording.
If you did not delete the recorded data of the Sub track in Step 4, the data of Sub track is recorded to both Main and
Sub tracks. To avoid duplicate playback of the data, mute the Sub track playback by touching [Sub] on the display
to turn it off.
NOTE
When the "Rec Mode" is set to
"Bounce," the selected track is automat-
ically changed to Main.
(page 92), and adjust the
NOTE
If you sing or play the keyboard during
Bounce recording, your performance is
also recorded to the Main track.
Genos Reference Manual
6
99