Yamaha Genos Reference Manual page 83

Editing Specific MIDI Events of the Recorded Data
The explanations here apply to step 4 on
as Note data and Voice selection, which have been created via Realtime Recording or Step Recording.
q
Editing Target
w
Expand
e
Event List
page 77. From the Step Edit display, you can edit specific MIDI events, such
q w
e
i o !0
Specifies the Editing Target.
• Ch 1–Ch 16: When one of these is selected, you can edit the channel data.
• SysEx: Lets you edit System Exclusive data which applies to all channels.
• Lyrics: Lets you edit Lyrics data.
• Chord: Lets you edit Chord/Section change events for Style playback.
This is shown only when "Chord" is selected above, and lets you convert the Chord/Section change
events you input in the Step Recording display to actual sounded note data. Make sure to execute this
function when finalizing Song data. If you exit from the MIDI Multi Recording display without exe-
cuting this function, starting Song playback produces no sound of the Style part.
In this area, the events of the Song data are listed and can be edited. Each line shows one event. Each
event can be selected by using the Cursor buttons (u) on the display, and can be edited by using the
Data dial.
Indicates the Song position
(measure: beat: clock) of the
corresponding event.
Depending on the Editing Target above (q), the listed and editable events differ as described below.
 When the Editing Target is set to one of "Ch1"–"Ch16":
Note An individual note within a Song. Includes the note name which corresponds
to the key which was played, plus a velocity value based on how hard the key is
played, and the gate time value (the length of a note).
Ctrl (Control Settings to control the Voice, such as volume, pan, filter and effect depth
Change) (edited via the Mixer), etc.
Prog (Program MIDI program change number for selecting a Voice.
Change)
P.Bnd (Pitch Data for changing the pitch of a Voice continuously.
Bend)
A.T. (After Touch) This event is generated when pressure is applied to a key after the key is
pressed.
 When the Editing Target is set to "SysEx":
ScBar (Score Start Determines the top measure number as the starting point of the Song data.
Bar)
!1 !2 !3 !4
Indicates the event Indicates the event value
type. or detail.
r
t
y
u
Genos Reference Manual
5
83