Monitoring Setup; Server Connection - Fujitsu ETERNUS AF250 Setup Manual

5.
Host affinity creation
Create an association between a host group and a port
group and an association between a host group and a
LUN group.
To display the screen to create a host affinity:
Click the [Connectivity] tab, and then click [Create Host
Affinity] in [Action].

Monitoring Setup

STEP
Perform the ETERNUS AF monitoring setup if required.
● Notification of the ETERNUS AF problems as they occur is possible if the event notification method and level
have been set.
● If remote support is required, the ETERNUS AF needs to be set to notify the remote support center of failures.
Remote support allows prompt detection and resolution of trouble.
Point
Configuration Guide (Basic)

Server Connection

STEP
Perform the settings required to connect to the server and install the required drivers. Perform the settings required
for network devices connecting the server and the ETERNUS AF.
After the server connection setup, confirm that the volumes in the ETERNUS AF can be recognized by the server.
All necessary settings are complete, and the ETERNUS AF is now ready for normal operation.
Configuration Guide (Basic)
•
Configuration Guide -Server Connection-
•
FUJITSU Storage ETERNUS AF250 All-Flash Arrays Setup Guide
Copyright 2017 FUJITSU LIMITED
10
P3AG-1862-02ENZ0