Fujitsu ETERNUS AF250 Setup Manual page 5

Mini SAS HD Cable Between Enclosures
3
When drive enclosures are installed, use mini SAS HD cables between enclosures to connect between the DI ports of
each enclosure.
When connecting the mini SAS HD cable between enclosures,
IMPORTANT
check the direction of the connector (the tab must be pointed
downward) and firmly insert all the way in.
Cable
● DI (OUT) side plug
The " ■ " symbol is
printed here.
● DI (IN) side plug
The "●" symbol is
printed here.
Attach the destination labels
to the plugs of the mini SAS HD
cables between enclosures.
FUJITSU Storage ETERNUS AF250 All-Flash Arrays Setup Guide
Rear view
● Controller enclosure
The controller enclosure only has DI (OUT) ports.
Plug in the connectors on which the " " symbol is printed.
DI (OUT) port
● Drive enclosure
Plug in the connectors on which the " " symbol is printed.
DI (IN) port
● Example of mini SAS HD cable connections between enclosures
5
Copyright 2017 FUJITSU LIMITED
Tab
Drive enclosure
Controller enclosure
P3AG-1862-02ENZ0