Basic Setup - Fujitsu ETERNUS AF250 Setup Manual

Power Cords
4
Connect the power cords to the inlets of the power supply unit.
Use release ties to hold the power cords in place.
Cable

Basic Setup

STEP
Use ETERNUS Web GUI to perform a basic setup of the ETERNUS AF.
Configuration Guide (Basic)
ETERNUS AF and PC Terminal Connection
1
Connect a PC terminal to the ETERNUS AF.
Connect the PC terminal to the RMT port of Controller 0 (CM#0) on the controller enclosure directly with the LAN
cable.
PC terminal
Powering On
2
Turn on the PC terminal and the ETERNUS AF.
Power switch
Rear view
LAN port
LAN cable
RMT port of Controller 0 (CM #0)
FUJITSU Storage ETERNUS AF250 All-Flash Arrays Setup Guide
Copyright 2017 FUJITSU LIMITED
Controller enclosure
Drive enclosure
Controller enclosure
6
Drive enclosure
Controller enclosure
P3AG-1862-02ENZ0