Mitsubishi MELSEC-Q Series Programming Manual page 33

3 SPECIFICATIONS
Item
Capacity
Number of files
Number of blocks
Number of SFC steps
Number of branches
SFC
Number of concurrently
Program
active steps
(including HOLD steps)
Number of operation
output sequence steps
Number of transition
condition sequence steps
Step transition watchdog timer function
1: For the modules whose serial number (first five digits) is "15101" or earlier, the
2: The maximum number of sequence steps per block depends on an instruction used for
REMARKS
The STEP-RUN operation and step trace functions are not available.
3 - 5
Table 3.2 Performance Specifications Related to SFC programs
L02SCPU, L02SCPU-P,
L02CPU, L02CPU-P
Max. 128 blocks (0 to 127)
Max. 1024 steps for all blocks
Max. 128 steps for one block
Max. 1024 steps for all blocks
Max. 128 steps for one block
maximum number of steps is 8,192.
operation output or a note editing setting. The number of steps (2k steps) indicated in
the table applies when "Unite (United Note)" is selected for note editing. Note that 2k
sequence steps per block may not be secured when "Peripheral (Peripheral Note)" is
selected for not editing.
If note editing is not set, 2k sequence steps or more per block may be secured
depending on the instruction used.
Max. 20k steps
Scannable SFC program: 1 (normal SFC program only)
Max. 2K steps for one block
No restriction on one step
One ladder block only
L06CPU,
L06CPU-P
Max. 60k steps
Max. 320 blocks (0 to 319)
Max. 16384 steps for all blocks
Max. 512 steps for one block
Max. 32
Max. 1280 steps for all blocks
Max. 256 steps for one block
2
None
L26CPU,
L26CPU-P,
L26CPU-BT,
L26CPU-PBT
Max. 260k steps
1
3 - 5