TP-Link Archer C3150 User Manual page 91

Chapter 12
2. Select the wireless network
3. Select an option from the
options, No Security, WPA/WPA2 - Personal (Recommended), WPA/WPA2 - Enterprise
and WEP. We recommend you don't change the default settings unless necessary.
If you select other options, configure the related parameters according to the help
page.
In addition
• Mode - Select a transmission mode according to your wireless client devices.
802.11b/g/n mixed,
mixed, 802.11n/ac mixed
it as default.
• Channel Width - Select a channel width (bandwidth) for the wireless network.
• Channel - Select an operating channel for the wireless network. It is recommended
to leave the channel to Auto, if you are not experiencing the intermittent wireless
connection issue.
• Transmit Power - Select either High,
The default and recommended setting is High.
¾ To enable the Airtime Fairness feature
The Airtime Fairness feature can improve the overall network performace by sacrificing
a little bit of network time on your slow devices. Enable Airtime Fairness when you wish
to sacrifice some of the networking time from the slow devices, so that your faster
devices can achieve better quality of service.
2.4GHz or 5GHz.
Security drop down list. The router provides four security
802.11g/n mixed or
or 802.11ac only
Middle
Customize Your Network Settings
802.11n only for 2.4GHz; and
for 5GHz. It is recommended to just leave
or Low to specify the data transmit power.
802.11a/n/ac
87