Set Up A Dynamic Dns Service Account - TP-Link Archer C3150 User Manual

Chapter 12
4. Enter the Description
5. Tick the Enable This Entry
Note:
You can also appoint IP addresses within a specified range to devices of the same type by using
For example, you can assign IP addresses within the range (192.168.0.50 to192.168.0.80) to Camera devices, thus
facilitating the network management.

12. 5. Set Up a Dynamic DNS Service Account

Most ISPs (Internet Service Providers) assign a dynamic IP address to the router and
you can use this IP address to access your router remotely. However, the IP address
can change any time and you don't know when it changes. In this case, you might need
the DDNS (Dynamic Domain Name Server) feature on the router to allow you and your
friends to access your router and local servers (FTP, HTTP, etc.) using domain name, in
no need of checking and remembering the IP address.
Note:
DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the router.
To set up DDNS, please follow the instructions below:
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
3. Select the DDNS Service Provider
to select TP-Link so that you can enjoy TP-Link's superior DDNS service. Otherwise,
please select NO-IP or DynDNS. If you don't have a DDNS account, you have to
register first by clicking
Note:
To enjoy TP-Link's DDNS service, you have to log in with a TP-Link ID. If you have not logged in with one, click
4. Click Register in the
Domain Name as needed. If you have selected NO-IP or DynDNS, enter the username,
password and domain name of your account.
5. Click Login and Save.
for the rule.
checkbox and click OK.
Network > Dynamic DNS.
(Dyndns, NO-IP or TP-Link ). It is recommended
Go to register.
Domain Name List
Customize Your Network Settings
if you have selected TP-Link, and enter the
Condition Pool feature.
Log in.
82