Chapter 4
Tips:
1. If you use
Dynamic IP
and
please go to
Advanced
>
2. If you still cannot connect to the internet, refer to
4. 3.
Set Up an IPv6 Internet Connection
Your ISP provides information about one of the following Internet connection types:
PPPoE, Dynamic IP(SLAAC/DHCPv6), Static IP, 6to4 tunnel, Pass-Through (Bridge).
1. Visit http://tplinkwifi.net, then log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
> IPv6.
PPPoE
and you are provided with any other parameters that are not required on the page,
Network
>
Internet
to complete the configuration.
FAQ
for further instructions.
Set Up Internet Connection
20