Chapter 11
VPN Server
Note:
Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static
IP address for router's WAN port and synchronize your System Time with internet.
3. In the
Client IP Address
filed, enter the range of IP addresses (up to 10 clients) that
can be leased to the client by the PPTP VPN server.
4. Enter the
Username
and
Password
to authenticate clients to the PPTP VPN server.
5. Click Save.
Step 2. Configure PPTP VPN Connection on Your Remote Client
Remote client can use Windows built-in PPTP software or third-party PPTP software to
connect to PPTP Server. Here we use
Windows built-in PPTP software
as an example.
1. Go to
Start
>
Control Panel
>
Network and Internet
>
Network and Sharing
Center.
2. Select
Set up a new connection or
network.
73