Running the Embedded Manager
Note: You should assign an IP address to the switch before beginning this procedure.
1
Open your browser.
Enter the url of the switch in the format http://aaa.bbb.ccc.ddd where
2
aaa.bbb.ccc.ddd is the IP address of the switch.
Note: The user name is "root"
The default password for read-write access is "root".
Note: The Web management passwords are the same as those of the CLI. If you
have created additional CLI user names or changed the default passwords then you
can use those passwords for Web management as well.
The welcome page is displayed:
Figure A.1
128
The Welcome Page
Avaya P130 User's Guide