Avaya P130 Cli; Command Groups - Avaya P130 User Manual

Chapter 6

Avaya P130 CLI

This chapter provides instructions for the configuration of your P130 using the text-
based Command Line Interface (CLI or Terminal Emulation). You can also
configure your P130 using the Avaya P130 Manager with its graphical user interface
(see Appendix A).
The configuration procedure involves establishing a Telnet session or a serial
connection and then using the P130's internal CLI. See Chapter 5 for instructions on
how to establish a Telnet session or serial connection, and for a description of CLI
conventions.
The CLI is command-line driven and does not have any menus. To activate a
configuration option, you must type the desired command at the prompt and press
Enter.

Command Groups

Following is a list of the commands groups.
• General Commands
• Access Level Commands
• Account Modification Commands
• License Commands
• Time-related Commands
• System Status Commands
• Download/Upload Commands
• Reset Commands
• Port Commands
• FlowControl Commands
• Spanning Tree Commands
• CAM Commands
• VLAN Commands
• Congestion Control Commands
• Multicast Commands
Avaya P130 User's Guide
Page 38
Page 39
Page 41
Page 43
Page 44
Page 47
Page 56
Page 65
Page 66
Page 81
Page 82
Page 86
Page 87
Page 93
Page 95
37