Congestion Control Commands
Show broadcast storm control Command
Use the show broadcast storm control command to display broadcast storm
status and settings.
The syntax for this command is:
show broadcast storm control [<module_number>[-<module_number>]]
<module_number>
[-<module_number>]
Example:
P130-N> show broadcast storm control
Module
--------
1
Set broadcast storm control Command
Use the set broadcast storm control command to enable or disable
broadcast storm control.
The syntax for this command is:
set broadcast storm control <module_number>[-<module_number>]
{enable|disable}
<module_number>
[-<module_number>]
{enable | disable}
Example:
P130-1# set broadcast storm control 1 enable
Avaya P130 User's Guide
One or more module numbers
Broadcast
Storm Control
----------------
disable
One or more module numbers
enable|disable broadcast storm control
Chapter 6
Threshold
------------
500
Avaya P130 CLI
93