Avaya MX10 User Manual page 11

Adjusting Headset Incoming Volume
1. Adjust the volume by turning the
Thumbwheel on the top panel.
2
3
4
5
2. Try different volume settings. 1 is
6
the quietest and 9 is the loudest.
3. "Make a Test Call" (see page 7)
provides more details about
adjusting your incoming volume.
10 10
L E A R N T H E B A S I C S
e n g l i s h e n g l i s h
L E A R N T H E B A S I C S
Adjusting Headset Outgoing Volume
1. Outgoing Volume is pre-set. Try making a
test call before adjusting (see page 7).
2. Access the Outgoing Volume Control,
remove the panel on the left-hand side of
the amplifier. The same panel houses the
Telephone/Amplifier Compatibility Switch.
3. Use the screwdriver attached to the
bottom of the amplifier to adjust the
Outgoing Volume Control. Turn clockwise
to make your voice louder to the caller.
Turn counter-clockwise to make your voice
quieter to the caller.
4. Replace the panel door and the screwdriver.
Adjusting Audio Device
Listening Volume
1. Use the Audio Device Incoming Volume
Control on top of the Switcher amplifier.
2. The Telephone/Computer Audio Switch
should be depressed (red indicator
showing). The Microphone Selection
Switch should be in default position
(no red indicator showing).
e n g l i s h
2
3
4
5
6
11