Table of Contents
Advertisement
4. If you need to update the driver, right-click on the device and select Filter Driver Configuration.
5. In the Filter Driver Configuration window, ensure the driver is installed and enabled. Click Refresh if making
changes.
10/27/2017
©2017 FLIR Integrated
Imaging Solutions Inc.
All rights reserved.
Note: If the filter driver is not installed, a caution icon appears
next to the device. Right-click on the device and select
GigE Filter driver is not installed-->Install filter driver to resolve.
FLIR Oryx
®
Installation Guide
5 Configuring Oryx Setup
10
Advertisement
Table of Contents
