STARTUP
Once the DRILL & MOUNT process is completed your Wallbox is ready to operate. But first lets take a moment to read and
review some useful information before starting to use your Wallbox:
•
Do not use your Wallbox for pruposes not described in the Product description chapter
•
Do not open in any case the charger' s front cover while the power supply is on.
•
Special precautions must be taken for medical or implantable electronics. Please contact the device manufacturer to
understand the effects that charging may have on such electronics.
•
REVIEW & CONFIRM ALL THE STEPS TAKEN
At this point you can turn on the power supply and enjoy your Wallbox experience
TROUBLESHOOTING
•
Your network supply is continously checked to ensure a safe operation of the device. If one of the parameters is not in
range the charger will stop the power supply to the vehicle.
•
Charging process uses a secure comunication protocol (called Control Pilot) between your wallbox and the vehicle. If
the car detects a problem during the charging process, it will be interrupted. At this point a message will pop up in your
status menu.
•
The internal stats of the Wallbox are also being parameterized in real time. A change in the normal operating values
will lead the charger to safely disconnect the power supply to the vehicle.
MAINTENANCE
Please take some precautions to ensure a correct maintenance :
•
There are no parts inside your Wallbox that need to be maintained by the user. Only qualified electrician can open and
manipulate your Wallbox.
•
Remeber to ensure that the power supply is turned off, before start cleaning your charger.
•
In case you want to clean your Wallbox, we recommned you to use a soft, dry or damp cloth. Do not use a spray or
direct water to clean your Wallbox charger.
•
It is mandatory to use the protection element or support, provided as an accessory, in order to protect the connector
from falling, dirt and other meteorological elements
WARRANTY
COPPER
- installation guide
10
www. w allbox.com
service@wallbox.com
en