INTRODUCTION
1.3
Indoor Unit
The indoor unit is ductable pressurized
residential and commercials applications.
It includes:
Casing with air inlet and outlet grills.
A
Bended coil with treated aluminum ns.
Multi-speed motor with internal protection
Advanced electronic control box assembly
Interconnecting wiring terminal block
Mounting plate
1.4
Filtration
The
EDS
Easily accessible, and re-usable pre
1.5
Control
The microprocessor indoor controller, and wire controller with remote controller, supplied as
1.6
Outdoor Unit
The EDS
wall supporting bracket. The metal sheets are protected by anti- corrosion paint work
It includes :
Compressor mounted in a soundproo
Rotary –
Scroll –
Interconnecting wiring terminal block.
1-2
outdoor units can be ins
All outdoor
Revision 0
u
Appendix A.
, Chapter 2.
n
Service Manual - EDS