Omega DP41-S User Manual page 99

MENU MIN/MAX*
BUTTON BUTTON
MAIN MENU SUB MENU
"L2 CNF":
"L2C.1=0"
"L2C.1=1"
"L2C.2=0"
"L2C.2=1"
"L2C.3=0"
"L2C.3=1"
"L2C.4=0"
"L2C.4=1"
"L2C.5=0"
"L2C.5=1"
"L2C.6=0"
"L2C.6=1"
Meter Function Menus
CONDITION
LOCKOUT CONFIGURATION #2
RDG.CNF (scale/offset method and display
features) may be chosen.
RDG.CNF (scale/offset method and display
features) is locked out.
Either RDG SC (computed input-to-display
scale factor)
or
RD.SC.OF (two data points, which
determine the reading scale/offset) may be
entered.
Either RDG SC (computed input-to-display
scale factor)
or
RD.SC.OF (two data points, which
determine the reading scale/offset) is
locked out.
RDG OF (offset computed in display digits)
may be entered.
RDG OF (offset computed in display digits)
is locked out.
INP.CNF (meter rates, front-end features,
prelinearizing scale/offset) may be chosen.
INP.CNF (meter rates, front-end features,
prelinearizing scale/offset) may not be
locked out.
IN.SC.OF (two data points for additional
scale/offset) may be entered.
IN.SC.OF (two data points for additional
scale/offset) may not be entered.
DEC PT (decimal-point location) may be
chosen
DEC PT (decimal-point location) may not
be chosen.
9
continued next page
9-3