Table of Contents
Advertisement
9
Meter Function Menus
MENU
BUTTON
MAIN MENU
* The 'MIN' button allows you to sequence through ALC.1, ALC.2, ALC.3,
ALC.4, ALC.5, ALC.6, ALC.7 and ALC.8.
The 'MAX' button allows you to select the "0" or "1" state for each "ALC"
condition.The 'MENU' button stores the selected values for each "ALC"
condition changed and advances the meter to the next configuration
("AL FNC").
Every underlined "0" or "1" is the factory preset value.
9-20
MIN/MAX/MENU *
BUTTON
SUB MENU
"ALC.5=0"
"ALC.5=1"
"ALC.6=0"
"ALC.6=1"
"ALC.7=0"
"ALC.7=1"
"ALC.8=0"
"ALC.8=1"
DESCRIPTION
Alarm 2 open-collector or relay output
Active ON or OFF:
On
Off
Filtered/unfiltered reading compared
with Alarm 2 (Setpoint 4) value:
Unfiltered
Filtered
Alarms 1 & 2 (Setpoints 3 & 4) action
and LEDs:
Enabled
Disabled
Alarm reset at P2-11 connector:
Disabled
Enabled
Advertisement
Table of Contents
