Siemens SCALANCE X-200RNA Operating Instructions Manual page 116

Functional description and configuration using Web Based Management
7.9 The "Agent" menu
Figure 7-32 Agent Event Configuration with the SCALANCE X204 RNA
You can configure the reaction of the SCALANCE X-200RNA to the following events:
● "Cold / Warm Start"
The SCALANCE X-200RNA was turned on or restarted by the user.
● "Link Change"
A port has failed or data traffic is being handled again via a port that had previously failed.
● "Authentication Failure"
There was an SNMP access with a bad password or inadequate access rights.
● "Power Error" (SCALANCE X204RNA only)
This event occurs only when power supply line 1 and line 2 are monitored. It indicates that
there was a change to line 1 or line 2.
116
Operating Instructions, 10/2016, C79000-G8976-C342-04
SCALANCE X-200RNA