Siemens SCALANCE X-200RNA Operating Instructions Manual page 9

Overview of the IE switches SCALANCE X-200RNA
The IE switches SCALANCE X-200RNA are available in different versions. These are listed
in the table below for a better overview:
IE switch
SCALANCE X204RNA (PRP)
SCALANCE X204RNA (HSR)
SCALANCE X204RNA EEC (PRP)
SCALANCE X204RNA EEC (HSR)
SCALANCE X204RNA EEC (PRP/HSR)
Finding information
To help you to find the information you require more quickly, the manual includes not only the
table of contents but also the following sections in the Appendix:
● Index
Audience
These Operating Instructions are intended for persons commissioning Ethernet networks with
the "Parallel Redundancy Protocol" (PRP) and/or "High-availability Seamless Redundancy
Protocol (HSR)".
Standards and approvals
The devices of the SCALANCE X-200RNA product line meet the requirements for the CE mark.
For more detailed information, refer to the section "Approvals and marking (Page 137)" in these
Operating Instructions.
Note
The specified approvals apply only when the corresponding mark is printed on the product.
Industry Online Support
In addition to the product documentation, the comprehensive online information platform of
Siemens Industry Online Support at the following Internet address:
(http://support.automation.siemens.com/WW/llisapi.dll?
func=cslib.csinfo2&aktprim=99&lang=en)
SCALANCE X-200RNA
Operating Instructions, 10/2016, C79000-G8976-C342-04
MLFB
6GK5204-0BA00-2KB2
6GK5204-0BA00-2MB2
6GK5204-0BS00-3LA3
6GK5204-0BS00-2NA3
6GK5204-0BS00-3PA3
Introduction
Supported modes
PRP ↔ Standard Ethernet
PRP ↔ HSR link
HSR ↔ standard Ethernet;
HSR ↔ PRP link
PRP ↔ Standard Ethernet
HSR ↔ standard Ethernet;
HSR ↔ PRP link
PRP ↔ standard Ethernet
HSR ↔ standard Ethernet;
HSR ↔ PRP link
9