Siemens SCALANCE X-200RNA Operating Instructions Manual page 104

Functional description and configuration using Web Based Management
7.9 The "Agent" menu
Agent Enabled Features
● "TELNET"
Here, you specify whether or not an unencrypted connection using TELNET can be
established.
● "SSH"
Here, you specify whether or not an encrypted connection using SSH can be established.
● "HTTPS only"
Here, you specify whether or not the WBM can only be reached via an SSL encrypted
connection.
● "E-Mail"
Here, you specify whether or not events are sent to an e-mail address.
● "Syslog"
Here, you specify whether or not events are sent to a Syslog server.
● "SNTP"
Enables / disables synchronization of the IE switch system time using an SNTP server in
the network.
● "DHCP"
Here, you specify whether or not the IP address can be obtained using the Dynamic Host
Configuration Protocol.
● "BOOTP"
Here, you specify whether the IP address can be obtained using the Bootstrap Protocol.
● "DCP"
If you select this option, the device can be accessed and configured using DCP (PST Tool
and STEP 7).
● "DCP Read Only"
If you select this option, the configuration data can only be read via DCP (Primary Setup
Tool and STEP 7).
Agent IP Configuration
● "IP Address"
● "Subnet Mask"
● "Default Gateway"
If you require the IE switch to communicate with devices (diagnostics stations, E-mail
servers, etc.) in a different subnet, you will need to enter the IP address of the default
gateway here.
● "MAC Address"
The MAC address of the SCALANCE X-200RNA.
104
Enter the IP address of the SCALANCE X-200RNA here.
Enter the subnet mask of the SCALANCE X-200RNA here.
Operating Instructions, 10/2016, C79000-G8976-C342-04
SCALANCE X-200RNA