Promise Technology VTRAK 15110 Quick Start Manual page 21

5. Ping
R. Return to previous menu
Please enter your menu choice>1
3. Press 1 and Enter to select Management Port.
--------------------------------------------------------------------------
Management Port IP Address: 10.0.0.2
Subnet Mask: 255.0.0.0
Gateway IP Address: 0.0.0.0
-------------------------------------------------------------------------
Management Port
1. DHCP
2. Management Port IP
3. Subnet Mask
4. Gateway
R. Return to Previous Menu
Please enter your menu choice>1
4. Press 1 and Enter to change the management port IP address.
--------Configure Management Port IP address--------
Current management port IP Address: 10.0.0.2
Modify management port IP address(y/n)?>y
New management port IP address>192.168.1.56 (an example only)
New management port IP address: 192.168.1.56
Press Enter key to return
5. Press Y and Enter to modify the management port IP address.
6. Type the new IP address and press Enter.
The CLU confirms the new management port IP address.
7. Press Enter to return to the Management Port menu.
8. Repeat steps 3 though 6 to set the Subnet mask and Gateway IP address.
All three settings must be correct in order for WebPAM PRO to connect to
the VTrak.
9. Restart the VTrak.
See Chapter 2 of the VTrak User Manual for information about
setting up a Telnet connection.
Step 8: Set Up Management Connections
Note
21