Input/Output Signals Of The Connectors - Sony DSR-DR1000 Service Manual

1-5-2. Input/Output Signals of the Connectors

INPUT
REF. VIDEO IN :
VIDEO IN :
SDI IN :
AUDIO IN :
DIGITAL AUDIO IN (AES/EBU) :
TIME CODE IN :
i.Link :
CONTROL :
REMOTE IN :
NETWORK (Ether) :
OUTPUT
VIDEO OUT :
SDI OUT :
AUDIO OUT :
MONITOR :
DIGITAL AUDIO OUT (AES/EBU) : BNC x 2, complies with AES-3id-1995
TIME CODE OUT :
i.LINK :
REMOTE OUT :
NETWORK (Ether) :
DSR-DR1000/DR1000P
BNC x 2 (loop-through with 75 Z)
Black burst 0.286 V (DSR-DR1000) or 0.3 V (DSR-DR1000P), 75 Z, negative sync
BNC x 4 (loop-through with 75 Z)
Y/CPST : 1.0 V p-p, 75 Z, negative sync
R-Y/C : 0.7 V p-p (75 % color bars for DSR-DR1000 or 100 % color bars for
DSR-DR1000P), 75 Z
S-C : 0.286 V p-p (DSR-DR1000) or 0.3 V p-p (DSR-DR1000P),
75 Z (burst level)
B-Y : 0.7 V p-p (75 % color bars for DSR-DR1000 or 100 % color bars for
DSR-DR1000P), 75 Z
BNC x 1
Serial Digital Interface (270 Mbps), complies with SMPTE259M & ITU-R BT.656
XLR 3-pin x 2, male
_6/_3 * /0/+4 dBu (selectable), Head Room: 20/18/16/12 dB (selectable), high
impedance, balanced
* : For DSR-DR1000P only
BNC x 2, complies with AES-3id-1995
BNC x 1, SMPTE time code (DSR-DR1000) or EBU time code (DSR-DR1000P),
0.5 to 18 V p-p, 3.3 kZ, unbalanced
6-pin x 1, complies with IEEE1394
4-pin minijack x 1 for connection of the supplied RM-LG2 Remote Control Unit
D-sub 9-pin x 1, for connection of editing control unit, (RS-422A interface)
RJ-45 type 8-pin modular jack x 1
100BASE-TX : complies with IEEE 802.3u
10 BASE-T : complies with IEEE 802.3
BNC x 4
Y/CPST : composite 1.0 Vp-p, 75 Z, negative sync
R-Y/S-C : R-Y : 0.7 V p-p (75 % color bars for DSR-DR1000 or 100 % color
bars for DSR-DR1000P), 75 Z
S-C: 0.286 V p-p (DSR-DR1000) or 0.3 V p-p (DSR-DR1000P),
75 Z (burst level)
B-Y/S-Y: B-Y: 0.7 V p-p (75 % color bars for DSR-DR1000 or 100 % color
bars for DSR-DR1000P), 75 Z
S-Y: 0.286 V p-p (DSR-DR1000) or 0.3 V p-p (DSR-DR1000P),
75 Z (burst level)
SUPER: composite 1.0 Vp-p, 75 Z, negative sync, (character superimpose)
BNC x 2
Serial Digital Interface (270 Mbps), complies with SMPTE259M & ITU-R BT.656
XLR 3-pin x 2, female
+4/0/_3 * /_6 dBm, 600 Z load, low impedance, balanced
* : For DSR-DR1000P only
Phone jack x 1, _11 **
dBu (DSR-DR1000)/_9
47 kZ, unbalanced, _20 dBFS (DSR-DR1000)/_18 dBFS (DSR-DR1000P)
** : With the PHONES control knob at the center position
BNC x 1, CSMPTE time code (DSR-DR1000) or EBU time code (DSR-DR1000P),
2.2 V p-p ±3 dB, 75 Z, unbalanced
6-pin x 1, complies with IEEE1394
D-sub 9-pin x 1, for connection of editing control unit, (RS-422A interface)
RJ-45 type 8-pin modular jack x 1
100BASE-TX : complies with IEEE 802.3u
10 BASE-T : complies with IEEE 802.3
dBu (DSR-DR1000P) ± 1 dB,
**
1-3 (E)