Upgrading Software - Sony DSR-DR1000 Service Manual

2-5. Upgrading Software

The DSR-DR1000/DR1000P mounts a CPU on the DPR-224 board. The software of this unit can be
upgraded by connecting this unit and a personal computer (PC) to the network.
Upgrade the software by the following procedures.
Preparations
1. Install the upgrading application software "nup.exe" to a PC in advance.
(Be sure to use the PC which was installed the Windows 98, Windows 2000 or Windows XP.)
2. Download the software to upgrade to the PC.
3. Connect the unit and PC to network.
Operating procedures of "nup.exe"
1. Starts the "nup.exe".
2. Enter the IP Address of the target DSR-DR1000/DR1000P in the "IP Address".
3. Enter the transferring HEX file name in the "File".
m
. By clicking the "Browse" button, the file name selection dialog appears.
. To transfer two or more files at a time, select them in the Internet Explorer window and drug and
drop them onto the "nup.exe", or select them in the file name selection dialog.
4. Click "Start" button.
When the file transfer is finished, the message "FTP END" appears.
5. When all files are transferred, restart the unit (power off and on again).
6. When the upgrading is completed properly, check the version using the maintenance menu. (Refer to
"Section 4 Maintenance Menu" for the check procedure.)
DSR-DR1000/DR1000P
2-5 (E)