Search Dial Assembly - Sony DSR-DR1000 Service Manual

5. To reattach the KY frame assembly, reassemble the
parts in the reverse order of steps 1 to 4.
n
When reassembling, put the protrusions A of the
main chassis into the holes A of the KY frame first,
and put the protrusions B into the holes B of the KY
frame. While pressing down the KY frame assembly
against the main frame, fix the KY frame assembly
with the four screws.
Fit with no
clearance
Protrusion B
Hole B
Protrusion
B
Protrusion
A
PWH
3 x 6
Hole B
Hole A
KY frame assembly
Hole A
DSR-DR1000/DR1000P
Protrusion B
Protrusion A
PWH
3 x 6
Hole B

5-2-2. Search Dial Assembly

1. Remove the top plate and front panel assembly.
(Refer to Section 2-3.)
2. Remove the KY frame assembly.
(Refer to Section 5-2-1.)
3. Remove the screw fixing the KY-536 board, and
remove the harness clamp.
4. Remove the dial cover and one screw to remove the
dial knob.
5. Remove the three screws to remove the search dial
assembly from the KY frame assembly.
Harness clamp
KY-536 board
Dial knob
B3 x 10
PWH
2.6 x 6
Dial cover
6. To reattach the search dial assembly, reassemble the
parts in the reverse order of steps 1 to 5.
n
When reassembling, apply locking compound onto the
screw fixing the dial knob.
Search dial assembly
PWH
3 x 6
KY frame assembly
5-3 (E)