Lexus LS500 Quick Manual page 69

Compass
Information about the destination, cur-
rent position and a compass is dis-
played on the screen.
The destination mark is displayed in the
●
direction of the destination. When driv-
ing, refer to the longitude and latitude
coordinates, and the compass, to make
sure that the vehicle is headed in the
direction of the destination.
● When the vehicle travels out of the cov-
erage area, the guidance screen changes
to the whole compass mode screen.
Displaying information about the
icon where the cursor is set
When the cursor is placed over an icon
on the map screen, and the
on the Remote Touch is pressed, the
name of icon is displayed. If "Info"
appears on the bottom of the name,
detailed information can be displayed.
1
Place the cursor over an icon.
2
Press the
Touch.
3 Select "Info".
4
Check that the information screen
is displayed.
"Save": Select to register as a mem-
ory point. To change the icon,
LS500_LS500h_Navi_OM50F66U_(U)
button
button on the Remote
3-1. Basic operation
name, etc.: →P.89
"Go" / "Enter": Select to set as a
destination.
: Select to call the regis-
tered number.
"Delete": Select to delete destina-
tion or memory point.
"Edit": Select to display the edit
memory point screen.
● Even when traffic information is not cur-
rently being received, traffic information
and "Info" will be displayed for a while
after traffic information has been
received.
● In some situations, calls to a POI may
automatically change to an international
call or may not be possible as a domestic
call.
Standard map icons
Icon Name
Park/Recreation
Business facility
Airport
Military
University
Hospital
Stadium
Shopping
Golf course
69
3