Lexus LS500 Quick Manual page 298

298
8-1. Phone operation (Hands-free system for cellular phones)
2
Select "Select Device" on the sub
menu.
3
Select "Add Device".
 When another Bluetooth
connected, a confirmation screen
will be displayed. To disconnect the
®
Bluetooth device, select "Yes".
4 Follow the steps in "Registering a
®
Bluetooth phone for the first time"
from step 5. (→P.38)
Selecting a registered device

1
Display the phone screen by either
operation:
 switch
 "MENU" button → "Phone"
2 Select "Select Device" on the sub
menu.
3 Select the desired device to be
connected.
4
Check that a confirmation screen is
displayed when the connection is
complete.
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
®
Bluetooth phone condition dis-
■
play
The condition of the Bluetooth
appears on the upper right side of the
screen. (→P.18)
LS500_LS500h_Navi_OM50F66U_(U)
Using the phone switch/micro-
phone
Steering switch
■
®
device is
By pressing the phone switch, a call
can be received or ended without tak-
ing your hands off the steering wheel.
Cursor switch
A
• Select and enter the item on the
multi-information display.
TEL switch
B
• Start talking
• End talking
• End dialing
Volume control switch
C
• Press the "+" side to increase the vol-
ume.
• Press the "-" side to decrease the vol-
ume.
Talk switch
D
• Press the talk switch to start the voice
command system.
• To cancel voice recognition, press and
®
hold the talk switch.
phone
Microphone
■
The microphone is used when talking
on the phone.