Lexus LS500 Quick Manual page 285

Wide rear view

The area around both corners of
A
the bumper will not be displayed.
● Black masking is done for distance
detection differences to the front of the
vehicle.
● The area covered by the camera is lim-
ited. Objects which are close to either
corner of the bumper or under the
bumper cannot be seen on the screen.
The area displayed on the screen may
●
vary depending on vehicle orientation or
road conditions.
● The camera uses a special lens. The dis-
tance in the image displayed on the
screen will differ from the actual distance.
The camera
The cameras for the panoramic view
monitor are located as shown in the
illustrations.
LS500_LS500h_Navi_OM50F66U_(U)
7-2. Panoramic view monitor
Front camera

Side cameras

Rear camera

Using the camera
If dirt or foreign matter (such as water
droplets, snow, mud, etc.) is adhering
to the camera, it cannot transmit a
clear image. In this case, flush it with a
large quantity of water and wipe the
camera lens clean with a soft and wet
cloth.
285
7