Lexus LS500 Quick Manual page 68

68
3-1. Basic operation
1
Select "Around Me".
2
Select the desired POI.
 Press the
Touch. The following buttons can be
displayed.
"Near Here": Select to search for POIs
near the current position.
"Along My Route": Select to search for
POIs along the route.
3 Check that the selected POI is dis-
played on the map screen.
Route trace
The traveled route can be stored and
retraced on the map screen. This fea-
ture is available when the map scale is
30 miles (50 km) or less.
Start recording the route trace
1
Select on the map screen.
2
Select "Route Trace".
 The route trace starts.
3
Check that the traveled line is dis-
played.
Stop recording the route trace
1
Select on the map screen.
LS500_LS500h_Navi_OM50F66U_(U)
button on the Remote
2
Select "Route Trace" again.
3
A confirmation screen will be dis-
played.
"Yes": Select to keep the recorded route
trace.
"No": Select to erase the recorded route
trace.
● The traveled route can be stored up to
approximately 621 miles (1000 km).
Switching the map mode on the
side display
The map mode on the side display can
be changed.
1
Select or to change the
map mode.
"Map": Display the single map screen.
"Compass": Display the compass
mode screen. (→P.69)
"Freeway Exit List": Display the freeway
exit list screen. (→P.84)
"Turn List": Display the turn list screen.
(→P.86)
"Turn-by-Turn Arrow": Display the
turn-by-turn arrow screen. (→P.86)
 Depending on the conditions, cer-
tain screen configuration buttons
cannot be selected.