Lexus LS500 Quick Manual page 283

Parts of objects which extend above a certain height cannot be displayed on
A
the screen.
As the images obtained from four cameras are processed and displayed on the standard
●
of a flat road surface; the panoramic view/moving view/see-through view/Side Clearance
View/Cornering View may be displayed as follows.
• Objects may look collapsed; thinner or bigger than usual.
• An object with a higher position than the road surface may look farther away than it actu-
ally is or may not appear at all.
• Tall objects may appear protruding from the non-displayed areas of the image.
● Variations in the brightness of the image may appear for every camera.
● The displayed image may be shifted by inclination of the vehicle body, change in vehicle
height, etc., depending on the number of passengers, amount of luggage, fuel quantity,
etc.
The displayed image may be shifted when the vehicle height is set to any height other than
●
normal.
● If the front doors or trunk are not completely closed; neither the image nor the guide lines
are displayed.
The position relations of the vehicle icon and the road surface or obstacle may differ from
●
the actual positions.
● The black areas of the vicinity of the vehicle icon are areas that are not captured by the
camera.
● Images like the following are combined, thus some areas may be difficult to view.
LS500_LS500h_Navi_OM50F66U_(U)
7-2. Panoramic view monitor
283
7