Lexus LS500 Quick Manual page 322

322
8-3. What to do if...
Automatic Bluetooth
■
tion on this system is set to off.
Set automatic Bluetooth
on this system to on when the engine
switch <power switch> is in ACCES-
SORY or IGNITION ON mode <ON
mode>. (→P.47)
Preferred device settings function
■
on this system is set to on.
Set preferred device settings function
on this system to off. (→P.47)
Set the desired cellular phone to the
highest automatic connection priority.
(→P.47)
When making/receiving a call
A call cannot be made/received.
Your vehicle is in a
■
Move to where
on the display.
When using the phonebook
Phonebook data cannot be trans-
ferred manually/automatically.
The profile version of the con-
■
nected cellular phone may not be
compatible with transferring
phonebook data.
For a list of specific devices which
operation has been confirmed on this
system, check with your Lexus dealer
or the following website:
http://www.lexus.com/MobileLink
LS500_LS500h_Navi_OM50F66U_(U)
®
■
connec-
Set automatic contact transfer function
®
connection
on this system to on. (→P.314)
■
Enter the passcode on the cellular
phone if requested (default passcode:
1234).
■
Complete transfer operation on the
cellular phone (approve transfer oper-
ation on the phone).
■
Set automatic contact transfer function
area.
on this system to off. (→P.314)
no longer appears
■
Enable message transfer on the cellu-
lar phone (approve message transfer
on the phone).
■
Set automatic transfer function on this
system to on. (→P.314)
Automatic contact transfer func-
tion on this system is set to off.
Passcode has not been entered on
the cellular phone.
Transfer operation on the cellular
phone has not completed.
Phonebook data cannot be edited.
Automatic contact transfer func-
tion on this system is set to on.
When using the Bluetooth
sage function
Messages cannot be viewed.
Message transfer is not enabled on
the cellular phone.
Automatic transfer function on this
system is set to off.
®
mes-