The system is connecting to the reg-
istered device.
At this stage, the Bluetooth
tions are not yet available.
8
Check that "Connected" is dis-
played and registration is complete.
If an error message is displayed, fol-
low the guidance on the screen to
try again.
●
If a cellular phone does not operate prop-
erly after being connected, turn the cellu-
lar phone off and on and then connect it
again.
Registering from phone
■
When registering from the system is
failed, or the phone name doesn't
appear on the registering screen, need
to connect the Bluetooth
manually.
1
Press the "MENU" button on the
Remote Touch.
2
Select "Phone".
Operations up to this point can also
be performed by pressing the
switch on the steering wheel.
3
Select "Yes" to register a phone.
LS500_LS500h_Navi_OM50F66U_(U)
4
Press the
Touch to select "If you cannot find..."
on the bottom of the screen.
®
func-
5
Select "Register from Phone".
6
Register the Bluetooth
using your Bluetooth
For details about operating the
Bluetooth
that comes with it.
A PIN code is not required for SSP
(Secure Simple Pairing) compatible
Bluetooth
the type of Bluetooth
connected, a message confirming
registration may be displayed on the
Bluetooth
Respond and operate the
Bluetooth
confirmation message.
7
Check that the following screen is
displayed, indicating pairing was
successful.
®
phone
The registered device is connecting
to the system.
At this stage, the Bluetooth
tions are not yet available.
2-2. Connectivity settings
button on the Remote
®
device
®
device.
®
device, see the manual
®
devices. Depending on
®
device being
®
device's screen.
®
device according to the
39
2
®
func-