New message notifications are not
displayed.
Notification of SMS/MMS/E-mail
■
reception on this system is set to
off.
Set notification of SMS/MMS/E-mail
reception on this system to on.
(→P.313)
Automatic message transfer func-
■
tion is not enabled on the cellular
phone.
Enable automatic transfer function on
the cellular phone.
In other situations
®
The Bluetooth
displayed at the top of the screen
each time the system is activated
Connection confirmation display
■
on this system is set to on.
To turn off the display, set connection
confirmation display on this system to
off. (→P.48)
*
: The engine switch <power switch> is in
ACCESSORY or IGNITION ON
mode <ON mode>.
Even though all conceivable mea-
sures have been taken, the symptom
status does not change.
The cellular phone is not close
■
enough to this system.
Bring the cellular phone closer to this
system.
LS500_LS500h_Navi_OM50F66U_(U)
connection status is
*
.
8-3. What to do if...
Radio interference has occurred.
■
®
Turn off Wi-Fi
devices or other
devices that may emit radio waves.
The cellular phone is the most likely
■
cause of the symptom.
Turn the cellular phone off, remove and
reinstall the battery pack, and then
restart the cellular phone.
Enable the cellular phone's Bluetooth
connection.
Stop the cellular phone's security soft-
ware and close all applications.
Before using an application installed on
the cellular phone, carefully check its
source and how its operation might
affect this system.
For details, refer to the owner's manual
●
that came with the cellular phone.
323
®
8