Lexus LS500 Quick Manual page 60

60
2-3. Other settings
Editing the location
1 Select "Location".
2 Scroll the map to the desired point
(→P.66) and select "Enter".
Editing phone number
1
Select "Phone #".
2 Enter the phone number and select
"OK".
Setting the valet mode
The security system can be set to on by
entering a security code (4-digit num-
ber).
When set to on, the system will
become inoperative once the electri-
cal power source is disconnected until
the security code is entered.
1 Display the vehicle settings screen:
 "MENU" button → "Setup" →
"Vehicle"
2
Select "Valet Mode".
3
Enter the 4-digit personal code and
select "OK".
4
Enter the same 4-digit personal
code again and select "OK".
 The system will request that you
input the security code again to
confirm that you remember it cor-
rectly.
 When valet mode activates, the sys-
tem stops and a security code
(4-digit number) standby screen is
displayed.
LS500_LS500h_Navi_OM50F66U_(U)
● If the 4-digit personal code is forgotten,
please contact your Lexus dealer.
If the valet mode has been acti-
vated
1
Enter the 4-digit personal code and
select "OK".
If an incorrect security code (4-digit
●
number) is entered 6 times, the system
will not accept another security code
(4-digit number) for 10 minutes.