Meaning Of The Icons; I/0/Ii Switch; Control Thermostat - State Water Heaters SCE 80-115 Installation, User And Service Manual

5
5.3

Meaning of the icons

5.4

I/0/II switch

5.5

Control thermostat

48
Controls
Table 5.1 displays the meaning of the icons on the control panel.
Table 5.1 icons and their meaning
Icon Name
I/0/II switch
Reset button
Temperature control
Week timer
a
Power Anode indicator
b LED
c Fault LED
Voltage LED
d
Using the I/0/II-switch, set the appliance to the ON- mode ('I' position), OFF
mode ('0' position) or the weekly program mode ('II' position). See paragraph
6.2 Operating states'.
In the OFF-mode the appliance actually continues to be live. This allows the
frost protection to remain active.
n
Remark
To disconnect the appliance from the mains, you need to use the main
switch between the appliance and the electricity grid.
Using the rotary knob on the control thermostat, you can set the desired water
temperature to between ± 40°C and ± 70°C. The rotary knob is continuous and
has divisions of 1 to 4. Table 5.2
temperatures.
Table 5.2 Temperature settings
Position Temperature
1 ± 40°C
2 ± 50°C
3 ± 60°C
4 ± 70°C
gis
Meaning
'ON mode' / 'OFF mode'
Resetting the burner controller
Setting water temperature (T
Adjustment option for weekly program
Show Power Anode state
Locking out the burner controller
Confirmation of burner controller voltage
provides an overview of positions and
Instruction Manual SCE
)
set