Udp Port; Output Signal Path; Output Signal Path "Asi - Triax CCE 210 Assembly Instructions Manual

UDP port

The UDP port setting is required if the cassette needs to be reached externally
for remote maintenance.
• Use the
and use
• Press the
• Press the

Output signal path

In this menu you define the signal path of the output transport streams.
Bx 2
ASI
• Use the

Output signal path "ASI"

In this setting the output transport stream is provided via the ASI output. For this
please also note chapter 6.1 "Combination with other cassettes" (page 32).
Bx 2
60000
buttons to select the digit of the port number displayed to be set
to set the port number wished ("0" ... "65535").
button.
—> Return to the main menu "Ethernet parameters"
button.
—> The "Output signal path" – "OUTPUT" main menu is activated.
—> If you do not want to do output settings, press the
The "Input parameter" – "INPUT" main menu is activated (page 23).
OUTPUT Bx 2
=> IP MPTS
buttons to set the signal path wished.
—> Output signal path "IP MPTS"/"IP SPTS" see page 20.
Bx 2
ASI
UDP-PORT
OUTPUT Bx 2
=> IP SPTS
OUTPUT
=>
- 18 -
button.
OUTPUT
=>
CCE 210