Quantity Of Data Packets; Forward Error Correction; Transmission Channel - Triax CCE 210 Assembly Instructions Manual

Quantity of data packets

Forward error correction

Transmission channel

In this menu you set the quantity of the data packets to be transmitted, the for-
ward error correction FEC and the transmission channel. If the forward error
correction is used the data to be transmitted is encoded in a redundant way
so that the addressee can correct transmission errors.
Defining the quantity of data packets
• Press the
• Using the
data packet ("1" ... "7").
Setting the forward error correction
• Press the
• Using the
"20/19").
Setting the transmission channel
• Press the
• Use the
"AnnexB").
• Press the
IP 1/2
7
button to select the data packet digit.
buttons define the quantity of MPEG data packets in one IP
button to select the forward error correction.
—> In position "off" the forward error correction (FEC) is switched off.
buttons set the value of the FEC wished ("off", "10/9" ...
button to select"Annex...".
buttons to set the transmission channel wished ("AnnexA" /
button.
—> The "Output IP address" – "OUT-IP" submenu is activated.
PKTS/FEC
off
- 22 - CCE 210