Teletext Option; Audio Signal Type And Bit Rate - Triax CCE 210 Assembly Instructions Manual

Teletext option

In this menu you switch teletext "ON" or "OFF".
• Use the
• Press the

Audio signal type and bit rate

In this menu you set the signal type and the bit rate the audio signal is to be
encoded.
• Use the
jectively improved stereo impression), "Dual Channel" (dual channel sound)
or "Mono L" (left) - of the audio signal.
• Use the
buttons ("192" ... "384" kbit/sec).
The higher the bit rate, the higher the quality of the transmitted audio signal.
Bear in mind that when the bit rate is increased, the bandwidth of the output
signal is also increased.
• Press the
AV 1/2
ON
buttons to switch teletext on or off ("ON" or "OFF").
button.
—> The "Audio signal type and bit rate" – "Audio" submenu is activated.
AV 1/2
Stereo
buttons to set the signal type – "Stereo", "Joint Stereo" (sub-
button to select the bit rate setting and set it as wished with the
button.
—> The "Level of the audio signal" –"VOLUME" submenu is activated.
TELETEXT
AUDIO
256 kbps
- 26 - CCE 210