Data Rate Of The Video Signal; Video Signal Type - Triax CCE 210 Assembly Instructions Manual

Data rate of the video signal

You can use this menu to set the data rate at which the video signal is to be
encoded. The higher the data rate, the higher the quality of the transmitted
video signal.
• Use the
("2.0" ... "14.0" Mbit/sec). If only audio signals are to be encoded, set the
data rate to "Audio only". In setting "Off" the input is switched off.
• Press the

Video signal type

You may set whether you would like to input a video composite signal "Compos-
ite" (CVBS) via the yellow Cinch socket or a S-video signal "S-Video" (Y/C) via
the Mini DIN socket in this menu.
• Use the
• Press the
AV 1/2
5 Mbps
buttons to set the data rate of the video signal
button.
—> The "Video signal type" – "INPUT" submenu is activated.
AV 1/2
Composite
buttons to set the desired type of video signal.
button.
—> The "TV standard" – "NORM" submenu is activated.
BITRATE
INPUT
- 24 - CCE 210