Transmission Protocol; Port Number - Triax CCE 210 Assembly Instructions Manual

Transmission protocol

Port number

In this menu you can define the transmission protocol and the port number.
Selecting the transmission protocol
• Press the
• Using the
Setting the port number
• Using the
• Using the
• Press the
IP 1/2
UDP
button to select "UPD".
buttons to select the transmission protocol wished:
UDP
—> " " – The "User Datagram Protocol" is for the connectionless
(without handshake) transmission of data to a certain application.
The port number of the service is also sent which the data should
obtain.
RTP
—> " " – The "Real-time Transport Protocol" is for continuously trans-
mitting multimedia data streams in an IP network. Unlike UDP, the
header is transmitted which makes the data transmission more ro-
bust.
buttons select the digit of the port number displayed to be set.
buttons set the port number wished.
button.
—> The "Quantity of data packets, Forward error correction, Transmis-
sion channel" – "
MODE/PORT
1234
PKTS / FEC
" submenu is activated.
- 21 - CCE 210