Table of Contents
Advertisement
5.2
Programming the cassette
• Switch on the head-end station.
Selecting the cassette
• If necessary select the cassette to be programmed by repeatedly pressing
the
button (e.g. Box 2).
Bx 1
.........
Bx 2
V 2
• Press the
—> Pressing the
programming procedure. This takes you back to the programme
item "Selecting the cassette" from any menu. Any entries that have
not been saved are reset to the previous settings.
—> Entries in the menus can be saved by pressing the
taken back to the "Selecting the cassette" menu item.
—> The parameters and functions to be set are underlined (Cursor).
—> The display shows the software version (e.g. V 43)
—> The processor reads the cassettes' data (approximately 10 sec-
onds).
Ein/On
—> The display shows e.g. the menu "Bx 2 ENCODER":
"Bx 2"
"ENCODER"
"V 2"
.........
.........
ENCODER
– – –
button.
button for longer than 2 seconds cancels the
BE–Remote
V 43
t > 10 s
stands for slot 2
type of cassette
software version of the cassette
Bx 3
.........
- 15 -
key. You are
.........
.........
CCE 210
Advertisement
Table of Contents
