Event Tab - HighPoint RocketStor 6628A User Manual

Enable continue rebuilding on error (default: Enabled)
When enabled, the rebuilding process will ignore bad disk sectors and continue
rebuilding until completion. When the rebuild is finished, the data may be accessible
but may also be inconsistent, due to any bad sectors that were ignored during the
procedure. If this option is enabled, HighPoint recommends checking the event log
periodically for bad sectors warnings.
Rebuild Priority (default: Medium)
You can specify the amount of system resources you want to dedicate to rebuilding
the array. There are 5 levels of priority [Lowest, Low, Medium, High, Highest].

Event Tab

The event view is a basic error logging tool built into the HRM.
Icon Name
Information
Warning
Error
42
Definition
Includes general
administrative tasks:
 Create/delete arrays

Configuring spares

Rebuilding arrays

Configuring event
notifications
 Configuring
maintenance
Alerts issued by the Host
Adapter:

High temperatures
 Sector errors

Communication
errors

Verification errors
Hardware related
problems

Hard disk failure

Broken errors

Memory failure