Troubleshooting
Problem
No power (No LCD display)
Cuff does not inflate properly Loose connection of the tube
No result displayed after
measurements
28
Possible cause
Power supply is not properly
plugged in
Battery is fully discharged
Leakage of the tube / bladder Check for cracks on the tube or the bladder. Replace the
Device is in Manual Mode
Solutions
Plug the power supply into the wall socket.
Recharge the rechargeable battery by plugging in the
power supply.
Make sure the tube of the cuff is securely connected to the
device.
blood pressure cuff if necessary.
Switch to «1x» or « » Mode and repeat the
measurements.