Welch Allyn ProBP 2400 User Manual page 18

Taking measurements in 1x, Manual and
Turn on the power
Turn on the device by pressing the On/Off Switch at the back
of the device to the ON position.
Connect the cuff to the device
Connect the cuff to the device by inserting the cuff connector
into the cuff connector socket.
18
Mode
Set maximum inflation pressure
Select desired maximum inflation pressure or "AUTO".
F
Refer to page 22 for the section of "Set maximum inflation
pressure"
3 sec.
1x 3x
Select an operation mode
There are three measurement modes that can be used.
Slide the switch to select 1x (standard single measurement),
Manual or Mode (automatic three reading average).
1x 3x 3 sec.
1x 3x 1x 3x